最有设计感的网站排名app
在《研发工程师玩转Kubernetes——PVC通过storageClassName进行延迟绑定》一文中，我们利用Node亲和性，让Pod部署在节点ubuntud上。因为Pod使用的PVC可以部署在节点ubuntuc或者ubuntud上，而系统为了让Pod可以部署成功，则让PVC与Pod亲和的ubuntud上的PV绑定。这样Pod在自身节点亲和性和PVC上都满足了条件。
在一些业务场景下，我们通过磁盘来保存数据，而程序通过数据设置自身状态。如果一旦一个Pod崩溃，我们希望新补充的Pod可以延续之前的状态。这个时候我们就可以使用PV的节点亲和性来完成上述调度。
PersistentVolume
下面PersistentVolume配置的节点亲和性要求资源只会在ubuntuc或者ubuntud上创建。
# default_storage_class_pv_ubuntucd.yaml
apiVersion: v1
kind: PersistentVolume
metadata:name: default-storage-class-pv-ubuntucdlabels:volume: lb-default-storage-class-pv
spec:capacity:storage: 1MivolumeMode: FilesystemaccessModes:- ReadWriteOncepersistentVolumeReclaimPolicy: Retainlocal:path: /tmpnodeAffinity:required:nodeSelectorTerms:- matchExpressions:- key: kubernetes.io/hostnameoperator: Invalues:- ubuntuc- ubuntud
PersistentVolumeClaim
PVC直接和上述PV绑定。
# default_storage_class_pvc_600k.yaml
apiVersion: v1
kind: PersistentVolumeClaim
metadata:name: default-storage-class-pvc-600k
spec:resources:requests:storage: 600KiaccessModes:- ReadWriteOnceselector:matchLabels:volume: lb-default-storage-class-pv
Deployment
下面这个Deployment会创建2个Pod。由于Pod的反亲和性，它们被强制要求调度到不同Node上。
# default_deployment_one_on_node.yaml
apiVersion: apps/v1
kind: Deployment
metadata:name: default-pv-app-one-on-node-deployment
spec:replicas: 2selector:matchLabels:app: default-pv-app-one-on-nodetemplate:metadata:labels:app: default-pv-app-one-on-nodespec:containers:- name: default-pv-app-one-on-nodeimage: busyboxcommand: ["/bin/sh", "-c", "if [ -f /tempdir/lockfile ] && ! { set -C; 2>/dev/null >/tempdir/lockfile; }; then tail -f /tempdir/lockfile; else exec 3>/tempdir/lockfile; if [ -n \"$POD_NAME\" ]; then name=$POD_NAME; else name=\"unknown\"; fi; while true; do echo \"this is $name.$name write something to lockfile\"; echo \"$name write something to lockfile\" >&3; sleep 1; done; fi"] volumeMounts:- name: default-pvc-volumemountPath: /tempdirenv:- name: POD_NAMEvalueFrom:fieldRef:fieldPath: metadata.namevolumes:- name: default-pvc-volumepersistentVolumeClaim:claimName: default-storage-class-pvc-600kaffinity:podAntiAffinity:requiredDuringSchedulingIgnoredDuringExecution:- labelSelector:matchExpressions:- key: appoperator: Invalues:- default-pv-app-one-on-nodetopologyKey: "kubernetes.io/hostname"
实验
查看Pod状态
kubectl get pod -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
default-pv-app-one-on-node-deployment-76bf96bb5-7tzxd 1/1 Running 0 21s 10.1.202.210 ubuntud <none> <none>
default-pv-app-one-on-node-deployment-76bf96bb5-mtk67 1/1 Running 0 21s 10.1.43.207 ubuntuc <none> <none>
可以看到两个Pod分别被调度到ubuntuc和ubuntud上。
调整Pod数量
kubectl scale deployment default-pv-app-one-on-node-deployment --replicas 3
kubectl get pod -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
default-pv-app-one-on-node-deployment-76bf96bb5-7tzxd 1/1 Running 0 46s 10.1.202.210 ubuntud <none> <none>
default-pv-app-one-on-node-deployment-76bf96bb5-mtk67 1/1 Running 0 46s 10.1.43.207 ubuntuc <none> <none>
default-pv-app-one-on-node-deployment-76bf96bb5-9wvq5 0/1 Pending 0 3s <none> <none> <none> <none>
可以看到，新创建的Pod处于Pending状态。当前系统还有ubuntua、ubuntud、ubunutue三个节点，它们由于不能满足Pod对PVC的要求（实际是PVC绑定的PV的要求），而没有被调度到。
kubectl get nodes
NAME STATUS ROLES AGE VERSION
ubuntud Ready <none> 2d22h v1.27.4
ubuntuc Ready <none> 2d23h v1.27.4
ubuntue Ready <none> 2d22h v1.27.4
ubuntub Ready <none> 2d23h v1.27.4
ubuntua Ready <none> 2d23h v1.27.4
恢复Pod
kubectl scale deployment default-pv-app-one-on-node-deployment --replicas 2
kubectl delete pod default-pv-app-one-on-node-deployment-76bf96bb5-7tzxd
kubectl get pod -o wide
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
default-pv-app-one-on-node-deployment-76bf96bb5-mtk67 1/1 Running 0 2m12s 10.1.43.207 ubuntuc <none> <none>
default-pv-app-one-on-node-deployment-76bf96bb5-qqtlm 1/1 Running 0 39s 10.1.202.211 ubuntud <none> <none>
可以看到Pod被正确的调度到刚被删掉Pod的Node上，进而可以继续使用它的PV，从而实现服务状态恢复和衔接上的目的。